Skip to content
Prime Interior Space Book a consultation

Menu

Book a consultation
← Back to the journal

How to measure for an interior estimate

Which area to use when budgeting for your Kolkata apartment, and what to measure next.

A floor plan gives you the first number for an interior estimate. A walk through the flat tells you what the number leaves out. A 750 sq ft home with an open living room and a 750 sq ft home with a long passage can need quite different amounts of cabinetry. Here is how to gather enough information for a useful first conversation with a designer.

Find the area the calculator needs

Look for the figure labelled “carpet area” on your plan or in the documents supplied with the flat. A brochure may give greater prominence to a saleable or super built-up area that includes a share of common space. If the two figures appear together, copy the carpet area and its unit. If only the larger figure appears, ask for the carpet area. Guessing a percentage to subtract can introduce an error before you have selected a single room.

Suppose your plan lists 1,000 sq ft of super built-up area and 750 sq ft of carpet area. To estimate a kitchen in our calculator, enter 750 and select “Kitchen only”. The calculator allocates a share of that area to the kitchen. Entering only the kitchen’s own floor area would apply that share a second time. The result is a planning allowance until a designer measures the cabinet runs.

Sketch the wall you want to use

Pick one wall and label its ends A and B on a rough sketch. Write down the full length, then mark each interruption from end A. A window, a projecting column and a door that opens against the wall all reduce the space available for a cupboard. Measure the ceiling height separately and mark any beam that sits lower.

For example, a bedroom wall might measure 3,000 mm from corner to corner. A door opening over the first 800 mm makes a full-width wardrobe across that wall impractical. A photo taken with the door open explains the problem better than a photo of the empty wall. Keep all dimensions in one unit and label them as approximate.

Take photographs someone else can read

Start with one photograph from the doorway so the designer can orient the room. Then take a straight-on photograph of each wall you plan to change. Include switches, sockets and pipe entries in the frame. Name each image after the room and wall on your sketch. “Kitchen, wall B, sink outlet” is easier to find during a call than a sequence of camera filenames.

Ask for two figures from the studio

Send the floor plan, marked sketches and photos along with a short list of what stays. Ask for an initial budget for that scope and a list of the measurements still needed for a firm quote. Keep the two together. If the site measurement changes the wardrobe width or adds a corner unit, you can see exactly why the next figure moves.

Estimate your interior budget

Scroll to Top